Abstract
악취 유발 물질인 <TEX>$H_2S$</TEX>를 처리하기 위한 UV/photocatalysis의 성능 향상에 관한 연구를 수행하였다. 광촉매 물질을 선정하기 위하여 EtOH을 기준물질로 사용하였으며, 광촉매 반응기의 광활성은 광촉매 반응기의 표면에 코팅된 광촉매의 표면특성과 높은 상관성을 나타냄을 확인하였다. PS 광촉매(STS-01)가 코팅된 광촉매 반응기는 기체선속도가 0.01 m/s, 상대습도가 40%의 조건에서 약 80%의 <TEX>$H_2S$</TEX> 산화효율을 보였으나, 그 이상의 선속도에서 반응활성은 급격히 감소하였다. 광촉매 반응기의 성능유지를 위하여 백금을 광촉매에 담지하였는데 이는 같은 실험조건에서 95% 이상의 우수한 <TEX>$H_2S$</TEX> 전환율을 나타내었다. Enhancement of photocatalytic activity of UV/photocatalysis was carried out to oxidize the gaseous <TEX>$H_2S$</TEX> in a tubular reactor coated with photocatalyst of sol type <TEX>$TiO_2$</TEX>. EtOH was used as the standard material to select the photocatalyst, and it was confirmed that the reactor activity was dependent on the coated surface characteristics. The selected photocatalytic reactor, which coated with STS-01, showed about 80% conversion when the gas linear velocity was 0.01 m/s and relative humidity was 40%. However, the conversion level of the reaction decreased significantly with increasing gas linear velocity. Pt was loaded on the photocatalyst to enhance and maintain the performance of the reactor, which enhanced the conversion level of <TEX>$H_2S$</TEX> more than 95% under the same experimental condition.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
