Abstract
The deposition of paraffin on pipelines during crude oil transit and low-temperature restart processes poses a significant challenge for the oil industry. Addressing this issue necessitates the exploration of innovative materials and methods. Pour point depressants (PPDs) emerge as crucial processing aids to modify paraffin crystallization and enhance crude oil flow. This study focuses on the combustion of polyethylene terephthalate (PET) waste, a prevalent plastic, in two distinct oils (castor and jatropha). The resulting black waxy substances (PET/Castor and PET/Jatropha) were introduced in varying weights (1000, 2000, and 3000 ppm) to crude oil. The PET/castor oil combination demonstrated a remarkable reduction in pour point from 18 to −21 °C at 3000 ppm concentration, significantly more effective than PET/jatropha blends. Substantial decreases in viscosity (up to 75%) and shear stress (up to 72%) were also observed for both blends, most prominently at lower temperatures near the pour point. The synergistic effect of PET and oils as nucleating agents that alter crystallization patterns and restrict crystal growth contributes to this enhanced low-temperature flow. This highlights the potential of PET plastic waste as an economical, abundant, and eco-friendly additive to develop high-performance PPDs for crude oil.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
