Abstract
The increasing population have resulted in a higher generation of domestic and industrial wastewater sludge. The sludge ends up as a landfill in designated areas which makes the land unusable. The search for lightweight materials for construction has led to the use of sludge as a viable replacement for the basic composition of concrete due to its low density. The dry sludge collected from Polokwane Waste Water Treatment Works (WWTW) in Limpopo Province was used as a partial replacement of sand in concrete. The sludge content in the sand was varied from 2.5, 5, 7.5, 10, to 12.5 %. The outcomes of the analysis indicate that the partial replacement of sand with dry sludge in the concrete mix is viable and useful. The result showed that up to 7.5 % of sand could be replaced with dry sludge in concrete for structural applications. Also, wastewater can be used as a curing medium. The unit weight of the concrete decreased with increasing sludge content, which was attributed to the lower density of the sludge. The SEM image revealed a porous nature and irregular surface morphology of the sludge and the concrete.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
