Abstract
A high calcium oxide fly ash (FA), a by-product waste of electric power generation has been used as hybrid activator in natural rubber (NR) composites filled with carbon black (CB). The aim of using FA is to reduce the environmental contamination by zinc oxide (ZnO) needed as activator for sulfur-vulcanization/crosslinking in final NR products. The FA was varied by adding in the composites with and without ZnO, and it was observed that chemical crosslinking could be generated although no ZnO was used anymore. The synergistic FA/ZnO-blend with FA 9 phr and ZnO 3 phr presented the best fit for the NR/CB composites, where it showed a proper crosslink density, reinforcement efficiency, cure characteristics, and mechanical properties in terms of modulus, tensile strength, elongation at break and tear resistance. This relates to the inorganic composition of the FA, in particular calcium oxide (CaO), which induces the thermal conductivity throughout the NR matrix and activates crosslinking between the NR molecules. The results showed effective use of FA in the composites, which can be applied to the CB-based formulations used in commercial NR applications like tires, barriers, and elastic stopper.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
