Abstract
Recycled aggregate derived from construction and demolition (C&D) waste offers new opportunities for the construction industry due to the shortage of natural aggregate. This study presents the feasibility of utilizing recycled fine aggregate (RFA) in ultra-high performance concrete (UHPC) to alleviate autogenous shrinkage, mitigate environmental effects, and further improve mechanical strengths. Three types of RFA with different particle sizes (0–0.6 mm, 0.6–1.18 mm, and 1.18–2.36 mm) are pre-saturated and then used as substitutes for quartz sand in UHPC. The influences of pre-saturated RFA on the workability, internal relative humidity, autogenous shrinkage, compressive strength, resistance to chloride ion penetration, and microstructure of UHPC are investigated. Experimental results showed that, compared to the plain UHPC, incorporation of 20 % RFA with particle size of 1.18–2.36 mm provides efficient internal curing, maintaining a higher internal relative humidity, and thus reducing autogenous shrinkage by 78.5 % at the age of 7 days. The compressive strengths of the UHPC containing 20 % RFA with particle size of 1.18–2.36 mm shows 7.1 % increase at the ages of 28 days. While it has a negligible effect on the fluidity and resistance to chloride penetration. The underlying mechanisms for the enhancement of properties involve the improved hydration degree of UHPC due to internal curing, which optimizes the structure of the interface transition zone and reduces the number of large pores. Furthermore, the sustainability analysis indicated that the use of RFA in UHPC exhibits 7.0 % lower carbon emissions and 7.8 % lower energy consumption, respectively. This study successfully proposes an effective approach for mitigating the autogenous shrinkage of UHPC without sacrificing strengths.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.