Utilization of Reclaimed Asphalt Pavements in Indian Low-Volume Roads

Abstract

Utilization of reclaimed asphalt pavement (RAP) in the construction industry is gaining an advantage over conventional materials in terms of sustainable credits. However, the amount of production of RAP and its utilization has no comparison. The general practice is to replace a small fraction of virgin aggregates with RAP, usually restricted to a maximum of 30%, in base layers to promote RAP usage in the pavement industry. The present study focuses on the utilization of a high proportion of RAP (>50%>50%) substitution in virgin aggregates (VA) as a base material in low volume roads (LVR). Mixes containing 100∶0100∶0, 80∶2080∶20, and 60∶4060∶40 proportions of RAP∶VARAP∶VA stabilized with different dosages of fly ash were evaluated for maximum dry density (MDD), optimum moisture content (OMC), unconfined compressive strength (UCS), resilient modulus (MrMr) and California bearing ratio (CBR). It was observed that the 80∶2080∶20 RAP∶VARAP∶VA design mix with 40% fly ash meets the design requirements (UCS>1.7  MPaUCS>1.7  MPa and CBR>80%CBR>80%) specified by the Ministry of Rural Development (MoRD), Government of India, and was considered to be an optimum mix. An example is discussed to design an LVR with an optimum mix according to the Indian Roads Congress (IRC) and AASHTO methods. The results revealed that the fatigue and rutting strains are well within the permissible limits for the new mix. The new mix design proved economical, as there was a 50% reduction in base layer thickness compared with the conventional design mix. Read More: http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29MT.1943-5533.0001374