Utilization of population balances in simulation of liquid-liquid systems in mixed tanks

Abstract

A simulation model has been developed to model drop populations in a mixed tank. A multiblock mixed tank model has been used with the drop population balance equations developed in the literature. The drop breakage and coalescence functions used in the population balance model take into account the local turbulent energy dissipation values. The drop breakage and coalescence function parameters are fitted against drop size measurements from dense liquid-liquid dispersions, which were assumed fully turbulent. Since the local turbulence and flow values of a mixed tank are used in the present model, the fundamental breakage and coalescence phenomena can be taken into closer examination. Furthermore, the present model is capable of predicting inhomogeneities occurring in a mixed tank. It is also considered as an improved tool for process scale-up, compared to the simple vessel-averaged population balance approach, or use of correlations of dimensionless numbers only. The present model can use two sources of data for fitting parameters in the drop rate functions. One is the transient data of the measured drop size distribution as the impeller speed is changed. The other is the time-averaged data measured at different locations of the mixed tank. Different flow regions can be chosen from direct measurements or from the CFD simulations in a straightforward manner. CFD flow simulation results can be used when no experimentally obtained flow conditions are available. This is especially useful for nonstandard vessels, such as reactors containing cooling coils.