Abstract

ABSTRACTA pilot study was conducted to evaluate the use of the pneumatic flow tube mixing method for stabilization and solidification of soft sediments dredged from the New York/New Jersey Harbor. The study included a comprehensive laboratory investigation aimed at determining the ideal mix for pneumatic flow tube mixing stabilization, and a pilot-scale demonstration of the pneumatic flow tube mixing technique in the field. Material stabilized during the demonstration was analyzed through unconfined compression tests, needle tests, laboratory vane shear tests, and flow tests in the laboratory and the cone penetration test in the field. Curing times for the samples were 3, 7, 14, and 28 days. The three cement content mixes were 4, 8, and 12% by weight (wet weight). Pneumatic flow tube mixing was demonstrated to be an efficient and rapid method for soft sediment stabilization with the resulting material showing uniform quality of mix meeting, New Jersey Department of Environmental Protection’s geotechnical and environmental fill placement criteria.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.