Utilization of modal stress approach in random-vibration fatigue evaluation

Abstract

Random-vibration fatigue evaluation can be of considerable importance in the design phase of aerospace structures due to the severe dynamic loads in service. This paper presents the utilization of modal stress approach to the issue of structural random-vibration fatigue evaluation. Prognosis of random fatigue hotspots by using stress mode shapes is theoretically demonstrated. A two-step procedure is proposed for computational efficiency. Firstly, modal stress analysis is conducted to locate the fatigue hotspots in a dynamic structure. Secondly, the frequency domain-based approach for random fatigue evaluation is performed at these hotspots, as opposed to the computation of the entire structure as before. The capability of stress mode shapes to locate fatigue hotspots is verified by numerical investigations. The finite element model of a single-lap plate structure containing various opening holes was constructed for case study. Six elements were identified as hotspots by using modal stress distributions. Then, random responses and fatigue evaluation of the entire structure were carried out for verification. Good agreement was observed between the fatigue damage contour and the modal stress distributions, which can indicate that the critical positions predicted by stress mode shapes have good accuracy. The calculation time and storage space can be significantly reduced by means of the proposed evaluation procedure. Therefore, the accuracy and efficiency of utilization of modal stress approach in random fatigue evaluation can be ensured.