Abstract
ABSTRACTFly ash-derived HZSM-5 catalyst was first applied in the catalytic pyrolysis of Jatropha residues in a semi-continuous fixed-bed reactor. The catalytic performance of HZSM-5 catalysts prepared from chemicals including conventional hydrothermal HZSM-5, Ni/HZSM-5 by ion exchange, and commercial HZSM-5 (Si/Al = 30) was evaluated for comparison. Catalytic pyrolysis of Jatropha residues with HZSM-5 catalysts was investigated in terms of product yields and qualities of bio-oil and bio-char. The liquid yield produced from fly ash-derived HZSM-5 was 29.4%, which was comparable to those obtained from chemicals and commercial (30.2–32.2%). Fly ash-derived HZSM-5 had high efficiency in increasing desirable compounds such as aliphatics and phenols as well as decreasing oxygenates and particularly N-containing compounds in bio-oils. The higher heating values and pH value of catalytic bio-oil achieved from fly ash-derived HZSM-5 were comparable to those achieved from HZSM-5 prepared from chemicals and commercial. The bio-char had 48–50 wt% carbon and was classified as mesoporous material. Overall, HZSM-5 derived from fly ash showed potentials to use as a catalyst for catalytic pyrolysis application.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.