Utilization of Fly Ash and Red Mud in Soil-Based Controlled Low Strength Materials

Abstract

To reduce the harm caused by industrial solid waste to the environment, and solve the problem of excavated soil disposal in buried pipeline management projects, this study proposes a method to produce soil-based controlled low strength materials (CLSM) by using industrial solid wastes (including fly ash and red mud) as partial replacements for cement. The properties of CLSM were characterized in terms of flowability, unconfined compressive strength, phase composition and microstructure. The test results showed that fly ash could significantly improve the flowability of CLSM, while red mud had more advantages for the strength development. When 20% fly ash and 30% red mud were combined to replace cement, the fluidity of CLSM was 248 mm, and the unconfined compressive strength (UCS) at 3, 7 and 28 days was 1.08, 1.49 and 3.77 MPa, respectively. The hydration products of CLSM were mainly calcium silicate hydrate gels, ettringite and calcite. Fly ash provided nucleation sites for cement hydration, while the alkali excitation of red mud promoted the dissolution of SiO2 and Al2O3 in fly ash. The filling and gelation of hydration products make the microstructure dense, which improves the mechanical properties of the mixture.