Abstract
In this work we used flower waste biomass as a biosorbent to remove Cr from tannery effluent through column experiments. The sorption capacities of biosorbent (Fine, coarse and rough grades) were also evaluated by employing chemical pretreatments viz., sodium hydroxide, acetic acid, glutaraldehyde and hydrogen peroxide. The order of percentage removal of Cr using the above pretreatments was: 10% hydrogen peroxide < Raw powdered-FWB < 2% Gluteraldehyde < 10% Acetic acid < 0.1N sodium hydroxide. Among the different grades of biosorbents used, fine grade adsorbed more Cr (70 %) than that of coarse (64%) and rough (62 %) sorbents. The removal percentage of Cr from tannery was analyzed by using Atomic Absorption Spectroscopy, the functional groups which are responsible for adsorption was examined by Fourier Transform- Infrared Spectroscopy and the amorphous behaviour of FWB facilitating metal biosorption was indicated by the X-ray diffractogram. This study showed that pretreated flower waste biomass is a potential sorbent of Cr, which could be successfully used to reduce the Cr content in tannery effluent.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
