Abstract
This research investigated the feasibility of using cellular glass insulation waste as fine aggregate in concrete paving block production. The effect of mixing proportions of cellular glass insulation waste at 0-40% by volume was studied. Results show that the amount of cellular glass waste can be used as a substitute for fine aggregate or sand up to 20%. Concrete specimens tested for compressive strength were found to be within an acceptable range of the interlocking concrete blockpavingstandard set byThailand Industrial Standards Institute. The compressive strength at 28 d was 41.50 MPa, with density ranging from 2.18 to 2.20 g cm-3. Thus, recycling of cellular glass wastes forconcrete paving block production can reduce expenditures in purchasing natural aggregates and can minimize environmental impact attributed to solid waste disposal.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.