Abstract

Ureolytic microbial calcium carbonate precipitation technology has recently emerged as a sustainable, eco-friendly approach for protection and remediation of building materials. However, use of urea has some disadvantages such as production of ammonia, which has raised environmental concerns, as well as risks of damage to concrete materials. In the present investigation, urea is replaced with direct influx of carbon dioxide and studied the precipitation of carbonates by bacteria (Bacillus megaterium SS3). The bacteria is able to grow well and precipitate carbonates well when CO2 influx of 99.5% pure passed (20ml/min) into the flasks for 60s. The amount of CaCO3 precipitated through CO2 influx is comparable with that of 2% urea used for precipitation. The percentage improvement in strength with respect to the control specimens by accelerated carbonation curing was 117% while it was 47% in urea treated specimens. Sorptivity was significantly reduced in accelerated carbonation specimens treated with bacteria compared to other treatments. Though carbonation increased compressive strength in control samples, but bacterial treatment significantly reduced the water absorption in concrete specimens. Present study results suggested that utilization of CO2 serves as an alternative to urea during CaCO3 precipitation.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.