Utilization of bituminous limestone ash from EL-Lajjun area in production of lightweight Masonry block

Abstract

The following work aims at minimizing the environmental impact of the solid wastes (ash) that is produced after the utilization of the bituminous limestone in thermal power stations and/or retorting processes. The laboratory tests have been selected with respect to construction needs and possible post construction conditions. Utilization of the various types of ash in the production of lightweight concrete block has revealed optimum results. The compressive strength of various ash–glass sand mixes has ranged between 19 and 76 kg/cm2 at 28 days. The compressive strength of ash–tuff mixes has ranged between 54 and 63 kg/cm2 at 28 days. Ultra light mixtures using ash–polyester with a density of 0.88 kg/m3 and a compressive strength of 21 kg/cm2 at 28 days are produced at normal room curing temperature without the use of ordinary Portland cement. The high alkalinity of El-Lajjun ash is considered a disadvantage when utilized in normal concrete mixes for structural purposes. Ash only can be mixed with aggregates to produce lean concrete for blinding purposes for use in foundations.