Utilization of additives in biodiesel blends for improving the diesel engine performance and minimizing emissions through a modified Taguchi approach

Abstract

Biodiesel from Jatropha oil is produced through catalyzed homogeneous transesterification. Hydrogen peroxide (H2O2) is considered as additive. Blends of Jatropha considered in the present study are 60% diesel, (40-A)% biodiesel and A% additive, varying A from 0 to 10. Identifying optimal input variables (such as additive volume percentage, injection pressure, and load) is important for improving the engine performance and reducing emissions. Air-fuel ratio; brake specific fuel consumption (BSFC); and brake thermal efficiency (BTE) are the engine performance characteristics. Carbon monoxide (CO); carbon dioxide (CO2); exhaust gas temperature (EGT); nitrogen oxide (NOx); and smoke opacity are the emission characteristics. 27 experiments need to be performed for the assigned 3 levels and 3 input variables. The Taguchi's L9 orthogonal array (OA) is chosen to perform only 9 experiments to obtain the optimal solution. The expected range of performance characteristics and emissions was obtained following a modified Taguchi approach. Empirical relationships are developed and verified through engine performance and emission characteristics.