Utilisation of MSWI bottom ash as sub-base in road construction: First results from a large-scale test site

Abstract

The preferred management option for municipal solid waste incinerator (MSWI) bottom ash in Denmark is utilisation rather than landfilling, but the current environmental quality criteria for bottom ash to be utilised in bulk quantities are rather strict. To evaluate the impact and risk assessments, upon which those criteria are based, a large-scale test site has been established. Three different MSWI bottom ashes have been used as sub-base in six test units ranging from 100 to 200 m 2 with top covers of asphalt, flagstones and pebbles, respectively. All units, except one, are equipped with bottom liners and leachate collection equipment. The test site provides information on the leachate quality and quantity as a function of time under different conditions and on the flow pattern in asphalt and flagstone covered roads and squares with MSWI bottom ash sub-base. In addition, the leaching behaviour of the bottom ashes has been studied in the laboratory. The test site was established in October 2002 and the project is still ongoing. Water balance results indicate that the water flow distribution is strongly influenced by lateral flow on or in the upper part of the bottom ash layer and possibly by preferential flow. Comparisons between eluates from laboratory leaching tests on the bottom ashes and observations of the leachate from the site as a function of L/S show fairly good agreement for salts but less agreement for some trace elements. Most likely, this is partly due to the fact that the pH observed in the leachate from the field sites is lower than that observed in the eluates from the laboratory leaching tests.