Using nanofluid saturated porous media to enhance free convective heat transfer around a spherical electronic device

Abstract

The thermophysical properties of the nanofluid saturated porous media are used in this work to optimize the thermal design of a spherical electronic device. Quantification of free convective heat transfer has been numerically determined by means of the finite volume method using the SIMPLE algorithm. The Rayleigh number based on the component diameter and water characteristics varies between 6.5x106 and 1.32x109, given the power generated during operation of this active component. The latter is disposed in the center of another sphere maintained isothermal. Its cooling is achieved by means of a porous medium saturated with a water based - Copper nanofluid whose volume fraction varies between 0 (pure water) and 10%. The thermal conductivity of the porous material's matrix ranges from 0 to 40 times that of the base fluid (water). Results of this work show that convective heat transfer systematically increases with this ratio according to a function depending on the Rayleigh number in the whole range of the considered volume fraction. The average Nusselt number also increases with the Rayleigh number according to a conventional power type law while influence of the fraction volume is moderate in the 2-10% range. The results are in agreement with those of previous works for particular thermal conditions. In order to optimize the thermal design of this electronic device, a correlation is proposed, allowing determination of the Nusselt number for any combination of the three influencing parameters for applications in various engineering fields, includind electronics.