Using Micrometer Scale X-Ray CT and Pore Network Modeling to Assess High-Energy Bi-Layer Li-Ion Battery Cathode Structures

Abstract

The optimization of cathode pore space is pivotal for enhancing the rate capability of lithium-ion battery electrodes. Previous studies on simulated cathodes have highlighted the importance of achieving an optimal porosity gradient, with a gradual increase from the current collector side to the separator side to accommodate the growing demand for ion transport in that direction [1]–[3]. In this research, we address this requirement by introducing and investigating bi-layer NCM 811 cathodes. These cathodes consist of a slurry-coated dense bottom layer and a spray-coated highly porous top layer with varying relative thickness to approximate the desired porosity gradient. Employing Micrometer-scale X-ray CT characterization and pore network modeling, we evaluate the structural features, demonstrating the effectiveness of the design, and quantify essential parameters such as porosity and tortuosity. Furthermore, the cathodes are integrated into lithium anode half-cells and subjected to electrochemical cycling at different rates to assess ion transport and rate capability. Our findings reveal that to achieve the highest discharge spatial energy density above 1C for cathodes approximately 100μm thick, the compressed bottom layer with 30% porosity should have a thickness of 60μm, while the highly porous top layer with around 47% porosity should be 40μm thick.Reference:[1] A. Shodiev et al., “Deconvoluting the benefits of porosity distribution in layered electrodes on the electrochemical performance of Li-ion batteries,” Energy Storage Mater., vol. 47, pp. 462–471, May 2022, doi: 10.1016/j.ensm.2022.01.058.[2] X. Lu et al., “3D microstructure design of lithium-ion battery electrodes assisted by X-ray nano-computed tomography and modelling,” Nat. Commun., vol. 11, no. 1, p. 2079, Apr. 2020, doi: 10.1038/s41467-020-15811-x.[3] K. Song, C. Zhang, N. Hu, X. Wu, and L. Zhang, “High performance thick cathodes enabled by gradient porosity,” Electrochimica Acta, vol. 377, p. 138105, May 2021, doi: 10.1016/j.electacta.2021.138105.