Abstract
Membrane electrode assemblies (MEA) for fuel cells require optimization of their nanoscale organization to reach performance parameters, which include enhanced power density, increased catalyst utilization and reduced cost. We applied sprayed layer-by-layer assembly to produce a high activity MEA for H(2)/O(2) fuel cells from polyaniline fibers (PANI-F). This technique produces "fast-prepared" membranes with nanoscale structure, which allows to adequately address specific tuning of their porosity, platinum loading, electronic conductivity, and proton conductivity. Pt nanoparticles were attached to the PANI-F in a reaction of selective heterogeneous nucleation. After functionalization, Pt/PANI-F were assembled with Nafion. Microscopic investigation revealed that functionalized polyaniline fibers formed a highly porous yet tight network of interpenetrating conductors connected to the catalytic Pt particles. The Pt/PANI-F LBL ultrathin MEA demonstrated a power densitiy of 63 mW cm(-2) and yielded a Pt utilization of 437.5 W g(-1) Pt which is comparable to the traditional fuel cell using carbon black as Pt support. Moreover, the amount of Pt used in this work is almost 2 times lower than for usual carbon-supported Pt catalysts.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
