Abstract

Publication presents the new method of determining the cetane number of fuels used for feeding compression ignition engines. CN determination is done by spectrum analysis in spectro-photometer and by calculations of mathematical models. The check tests were carried out on more than ten derv samples. The obtained CN values were compared with the values of this parameter obtained according to norm PN-EN ISO 5165 in trustworthy laboratories. Subsequently the conclusions were drawn on the possibilities of applying the analyzer for determination of this parameter

Highlights

  • One of the main parameters determining fuel usefulness for a self-ignition engine is the cetane number

  • The CN scale has changed, which was defined by the previous standard as the percent of volumetric content of cetane in a mixture with 1-methylnaphthalene (AMN)

  • The value of CN = 100 was ascribed to cetane, whereas CN = 0 to AMN

Read more

Summary

Using Irox Diesel analyser to estimate cetane number of diesel fuel

Publication presents the new method of determining the cetane number of fuels used for feed-ing compression ignition engines. W Europie od 1998 roku obowiązuje nowa norma na oznaczanie właściwości zapłonowych olejów napędowych, która określa sposób wyznaczania liczby cetanowej oleju napędowego. Oznaczenie LC odbywa się na zasadzie porównania właściwości zapłonowych badanego paliwa z analogicznymi właściwościami mieszanek paliw wzorcowych o znanych liczbach cetanowych. Od listopada 2003 roku obowiązuje norma PN-EN ISO 5165: wprowadza ona dwa rodzaje paliw wzorcowych, tzw. Skala LC, która w poprzedniej normie została zdefiniowana jako procent objętościowej zawartości cetanu w mieszance z 1-metylonaftalenem (AMN). Obecnie zgodnie z normą PN-EN ISO 5165 wartość liczby cetanowej oblicza się z wzoru LC = % cetanu (heksadekan) + 0,15 (% HMN). Drugą grupę stanowią paliwa wzorcowe wtórne są to mieszanki sporządzone w proporcjach objętościowych dwóch wybranych mieszanin węglowodorowych oznaczonych jako „paliwo T” o dużej LC oraz „paliwo U” o małej LC

Introduction
Cel i zakres badań
Metodyka zastosowana w analizatorze Irox do szacowania LC
Wyniki badań i ich analiza
Methodology used in Irox analyzer for CN determination
Results of tests and their analysis
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call