Using image analysis to quantify defects and prioritize repairs in built-up roofs

Abstract

PurposeThis paper aims to use convolutional neural networks (CNNs) to provide an objective approach to classify deteriorated building assets according to the type and extent of damage. This research supports automated inspection of buildings and focuses on roofing elements as one of the most critical and externally distressed elements in buildings.Design/methodology/approachIn this paper, 5,000+ images of deteriorated roofs from several buildings were collected to design a CNN system that automatically identifies and sizes roofing defects. Experimenting with different CNN formulations, the best accuracy is achieved using two-stage CNNs. The first-stage CNN classifies images into defect/no defect, while the second stage classifies the defected images according to the damage type. Based on the image classification, optimization is used to prioritize roof repairs by maximizing the return from limited rehabilitation funds.FindingsThe developed CNNs reached 95% and 97% accuracy for the first and second phases, respectively, which is higher than achieved in previous literature efforts. Using the proposed model to automate inspection and condition assessment activities proved to be faster than conventional methods. Repair/replace strategy for a case study of 21 campus buildings based on their condition and budgetary constraints was suggested.Research limitations/implicationsFuture research includes testing different data acquisition technologies (e.g. infrared imaging), performing severity-based classification and integrating with BIM for defect localization.Originality/valueThis study provides an objective approach to automate asset condition assessment and improve funding decisions using a combination of image analysis and optimization techniques. The proposed approach is applicable toward other asset types and components.