Abstract
Fluorescein and bromide tracers were used to study baseflow mechanisms of a small suburban watershed in northeast Iowa, USA. The tracers were applied to ten injection holes ranging from 1.3 to 3.0 ft in depth in two phases. Separately, two PVC wells (15 and 16 ft deep) were used to investigate tracer movement in a deeper flow system. Over 30 days of phase 1, none of the tracers was detected in the creek water. In phase 2, fluorescein was irregularly detected in the creek at two sites, whereas bromide was detected at one site only. Meanwhile, soil analysis detected measurable diffusion of bromide and fluorescein at four sites. At each of these sites, the tracer was found to be diffusing toward the creek. None of the tracers applied to the deeper PVC wells showed any movement toward the creek over 1 month of continuous sampling. Isotopic composition of water samples varied spatially as well as temporally going from the deep well (δ18O = −8.89‰) to the injection holes (average δ18O = −8.42‰), to the creek (average δ18O = −7.86‰), and further to the rain samples (average δ18O = −4.68‰). The analytical error margin is ±0.09‰. Samples from the injection holes were generally heavier than the deep well sample and lighter than the creek samples, indicating that there was no significant connection between the surface and the subsurface systems. Furthermore, the sporadic appearance of bromide and fluorescein both spatially and temporally points to the fact that baseflow does not constitute a significant part of the area's stream discharge. Copyright © 2014 John Wiley & Sons, Ltd.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have