Using Cu-TCPP Nanosheets as Interlayers for High-Performance Organic Solvent Nanofiltration Membranes

Abstract

The development of highly permeable and selective thin-film composite (TFC) membranes is essential for organic solvent nanofiltration (OSN) applications. However, overcoming the permeability–selectivity trade-off in polymer membranes remains highly challenging owing to the difficulty in controlling the thickness and nanostructures of the selective layers. In this study, TFC OSN membranes with sandwich-like structures were developed via interfacial polymerization on Cu-TCPP nanosheet-modified microporous polyvinylidene fluoride (PVDF) substrate surface. The interfacial polymerization was done by using mixed amine (polyethyleneimine and piperazine) in the aqueous phase and the 1,3,5-benzenetricarbonyl trichloride in the hydrophobic ionic liquid phase as monomers. It was found that the Cu-TCPP nanosheets of micrometer lateral dimensions and nanometer thickness (1.5 ± 0.6 nm) can be deposited on the PVDF substrate as an interlayer to facilitate the following interfacial polymerization reaction. The Cu-TCPP interlayer also can be served as a binder between the polyamide selective layer and the microporous PVDF substrate to enhance their mechanical strength. As compared with the PVDF/PA membrane, the PVDF/t-Cu-TCPP/PA membrane exhibited higher elongation (8.0 vs. 4.6%) while ensuring slightly lower tensile strength (36.0 vs. 48.6 MPa). Under optimal synthetic conditions, the TFC membranes could achieve 2.7 L m–2 h–1 bar–1, and 98.9% and 95.0% rejection to Brilliant Blue R (826 Da) and Congo red (697 Da), respectively, in ethanol. Furthermore, the membranes showed steady performance throughout the 36 h nanofiltration of the Rose bengal/ethanol mixture and exhibited good performance in the concentration of lecithin in methanol. Accordingly, this work highlights the potential of using thin metal–organic framework nanosheets as interlayers to develop high-performance TFC membranes for OSN applications.