Using controlled subsurface releases to investigate the effect of leak variation on above-ground natural gas detection

Abstract

Pipelines transport natural gas (NG) in all stages between production and the end user. The NG composition, pipeline depth, and pressure vary significantly between extraction and consumption. As methane (CH4), the primary component of NG is both explosive and a potent greenhouse gas, NG leaks from underground pipelines pose both a safety and environmental threat. Leaks are typically found when an observer detects a CH4 enhancement as they pass through the downwind above-ground NG plume. The likelihood of detecting a plume depends, in part, on the size of the plume, which is contingent on both environmental conditions and intrinsic characteristics of the leak. To investigate the effects of leak characteristics, this study uses controlled NG release experiments to observe how the above-ground plume width changes with changes in the gas composition of the NG, leak rate, and depth of the subsurface emission. Results show that plume width generally decreases when heavier hydrocarbons are present, the leak rate is reduced, and as leak depth decreases from 0.9 to 0.6 m. The study illustrates that heavy gas leaks from flowlines and gathering lines could currently be more challenging to detect than leaks from distribution pipelines as the plume is trapped close to the ground. Further, this study shows that leaks from pipelines laid in covers meeting minimum depth requirements of 0.9 m could be easier to detect compared to those buried shallower. Overall, this study illustrates that leak survey protocols for flowlines and gathering lines should be different from distribution pipelines and tailored to the compositions of the transported NG to report emissions accurately. The study aims to improve the understanding of flowline/gathering line leaks to prevent fatal accidents, such as the 2017 explosion from a gathering line in Firestone, Colorado, that resulted in two fatalities and one injury.