Using an innovative umbrella-shape membrane module to improve MBR for PN-ANAMMOX process.

Abstract

Membrane fouling has been a key factor limiting the applications of membrane bioreactor (MBR). In this study, a novel umbrella-shape membrane module was applied to construct two MBRs for two-stage partial nitrification-anaerobic ammonia oxidation (PN-ANAMMOX) process. After 55days operation, the ANAMMOX process was started and the PN process was well controlled. Then, the ANAMMOX and PN process were successfully coupled to run the PN-ANAMMOX process. On 103days, the best nitrogen removing effect was achieved with the maximum nitrogen loading rate (NLR) of 0.4kgN·(m3·d)-1 and the corresponding maximum total nitrogen removal rate (TNRR) of 75.23%.The umbrella-shape membrane module in both reactors only needed to be cleaned once during the operation for 105days, indicating that the membrane module had better resistance to membrane fouling. The functional bacteria were cultivated in suspension state; moreover, the cell densities of ammonia oxidizing bacteria (AOB) and ANAMMOX bacteria (AnAOB) reached 58.32 × 1012 copies/g sludge and 28.39 × 1012 copies/g sludge. Their abundances reached 73.25% and 57.80% of the total bacteria, respectively. MBR improved by umbrella-shape membrane module could realize the rapid start-up of ANAMMOX process, effective control of PN process, and stable operation of PN-ANAMMOX process. This study provided a novel approach to control membrane fouling by optimizing the membrane module shape and widened applications of MBRs in PN-ANAMMOX process.