Abstract

BackgroundAdapting to external forces during walking has been proposed as a tool to improve locomotion after central nervous system injury. However, sensorimotor integration during walking varies according to the timing in the gait cycle, suggesting that adaptation may also depend on gait phases. In this study, an ElectroHydraulic AFO (EHO) was used to apply forces specifically during mid-stance and push-off to evaluate if feedforward movement control can be adapted in these 2 gait phases.MethodsEleven healthy subjects walked on a treadmill before (3 min), during (5 min) and after (5 min) exposure to 2 force fields applied by the EHO (mid-stance/push-off; ~10 Nm, towards dorsiflexion). To evaluate modifications in feedforward control, strides with no force field ('catch strides') were unexpectedly inserted during the force field walking period.ResultsWhen initially exposed to a mid-stance force field (FF20%), subjects showed a significant increase in ankle dorsiflexion velocity. Catches applied early into the FF20% were similar to baseline (P > 0.99). Subjects gradually adapted by returning ankle velocity to baseline over ~50 strides. Catches applied thereafter showed decreased ankle velocity where the force field was normally applied, indicating the presence of feedforward adaptation. When initially exposed to a push-off force field (FF50%), plantarflexion velocity was reduced in the zone of force field application. No adaptation occurred over the 5 min exposure. Catch strides kinematics remained similar to control at all times, suggesting no feedforward adaptation. As a control, force fields assisting plantarflexion (-3.5 to -9.5 Nm) were applied and increased ankle plantarflexion during push-off, confirming that the lack of kinematic changes during FF50% catch strides were not simply due to a large ankle impedance.ConclusionTogether these results show that ankle exoskeletons such as the EHO can be used to study phase-specific adaptive control of the ankle during locomotion. Our data suggest that, for short duration exposure, a feedforward modification in torque output occurs during mid-stance but not during push-off. These findings are important for the design of novel rehabilitation methods, as they suggest that the ability to use resistive force fields for training may depend on targeted gait phases.

Highlights

  • Adapting to external forces during walking has been proposed as a tool to improve locomotion after central nervous system injury

  • Effects of a force field applied at 20% of stride Figure 2 summarizes the effects of FF20% exposure on knee and ankle kinematics for a representative subject (S3)

  • Five minute exposure to FF20% induces a rapid modification in feedforward control during mid-stance When exposed to a force field during mid-stance (FF20%), subjects exhibited an initial error in lower limb kinematics

Read more

Summary

Introduction

Adapting to external forces during walking has been proposed as a tool to improve locomotion after central nervous system injury. Recent work in the field of motor learning has shown that when subjects make several reaching movements in an altered force environment ('force field'), they gradually learn to integrate the new force as part of their movement planning (modification in feedforward control; [5]). These modifications persist temporarily upon return to the 'normal' environment [5,6,7,8]. Studies have been extended to the swing phase of walking, and the application of force fields leads to aftereffects for this more automatic movement [12,13,14,15,16]

Methods
Results
Discussion
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call