Abstract
The objective of this research is to determine the effect on the flexural fatigue performance of asphalt mixtures of using granular Buton rock asphalt (BRA) modifier binder. A repeated flexural bending test under the controlled-strain mode of loading in accordance with Austroads AG:PT/T233 test method was conducted to examine fatigue behaviour of the BRA modified asphalt mixtures and the unmodified asphalt mixtures (as control mixtures) for a dense grading of 10mm. Beam specimens were tested at the temperatures of 20°C and three different peak tensile strain (400, 600 and 800μɛ) and used classical and energy-stiffness ratio approach to analyse fatigue life of the asphalt mixtures. According to the test results, the fatigue lifes of the BRA modified asphalt mixtures were higher than that for the unmodified asphalt mixtures at the test temperature and tensile strain. Moreover, based on the initial flexure stiffness and phase angle values, BRA modified asphalt mixtures showed more elastic and less viscous behaviour than unmodified mixtures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.