Using a multi-layered transducer model to estimate the properties of paraffin wax deposited on steel

Abstract

When using ultrasound for detecting low impedance materials on the surface of high impedance materials, a major challenge is the contrast difference between the strong reverberations from the high impedance material and the weak echoes received from the low impedance material. The purpose of this work is to present the theoretical and experimental validation of an ultrasonic methodology for estimating the acoustical properties of paraffin wax on the surface of steel. The method is based on modeling and inversion of the complete electro-acoustic channel from the transmitted voltage over the active piezoelectric element, to the received voltage resulting from the acoustic reverberations in the multilayered structure. In the current work, two conceptually different models of the same multi-layer transducer structure attached to steel is developed and compared with measurements. A method is then suggested for suppressing the strong reverberations in steel, hence isolating the wax signals. This contrast enhancement method is fitted to the model of the structure, facilitating parameter inversion from the wax layer. The results show that the models agree well with measurements and that up to three parameters (travel time, impedance and attenuation) can be inverted from the wax simultaneously. Hence, given one of the three parameters, density, sound speed or thickness, the other two can be estimated in addition to the attenuation.