Abstract
PurposeThe purpose of this research paper was to investigate the use of methanolic extract of Salvia hispanica (S. hispanica) as a green corrosion inhibitor for bronze in a simulated acid rain solution.Design/methodology/approachExtract of S. hispanica was used as a green corrosion inhibitor for bronze in simulated acid rain solution. Electrochemical techniques such as potentiodynamic polarization curves, electrochemical impedance spectroscopy and electrochemical noise were used. Parameters such as polarization, charge transfer and noise resistance (Rp, Rct and Rn, respectively) were calculated.FindingsResults showed that the extract acts as a good, anodic type of inhibitor. The inhibitor efficiency increased with increasing its concentration up to 400 ppm, decreasing beyond this concentration. Efficiency also increased with an increase in the immersion time. The inhibition was due to the adsorption of components found in the S. hispanica extract following a Langmuir adsorption isotherm.Practical implicationsS. hispanica extract can be used as a corrosion inhibitor for bronze in acid rain solution.Originality/valueThis study provides new information on the inhibition features of S. hispanica under specific conditions. This eco-friendly inhibitor could find applications to protect bronze exposed to polluted urban atmospheres.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
