Abstract
In this study, usability of Polyamide-6 type engineering polymer as a new rock bolt material was investigated carrying out a series of laboratory and field scale experiments. The Polyamide-6 type polymer tested as a grouted rock bolt material was assessed to have a good body strength, large elastic deformation limit and high energy absorbing capacity. The load bearing capacity of Polyamide-6 rock bolts was found to dominantly depend on the mechanical anchorage in front of the shank as a result of having low adhesion to the cement grout values. In this study, polyamide rock bolts have been designed with different mechanical anchors. It was suggested to start the systematical use of polyamide rock bolts having ideal support reactions under both static and dynamic load conditions in rock engineering. Especially, Polyamide-6 rock bolts were assessed to be economically usable in rock masses with squeezing, swelling or bursting problem, which need for non-decreasing support pressure while being higly deformed and good energy absorption capacity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Geosynthetics and Ground Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.