Abstract

Isolated ultrasonic vibrations were used to treat feed water from a 20 bar steam-producing water tube boiler. Physical treatments such as ultrasounds and reverse osmosis (RO) are recommended as the most eco-friendly for this purpose. A novel bench-scale prototype delivering 6 L/h of treated water was designed and built. The ultrasonic atomization of raw water with 1.7 MHz piezoelectric transducers and subsequent humidification and dehumidification of drag airflow was the innovating sequence of operations used as a treatment technique. To ensure greater humidification capacity to the drag air, the energy available from the thermal inertia of the liquid column (raw water) in the prototype vaporization chamber was used to heat this air flow. After a single pass of raw water through the bench-scale prototype, a 98.0% reduction in conductivity and a 99.0% decrease in the content of total dissolved solids were obtained at a drag air temperature of 70 °C. Compared to RO, two of the main advantages of the proposed ultrasonic wave method are the elimination of the use of chemical agents in the pre-treatment phase and a significant reduction in maintenance costs by membrane replacement.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call