Use of ground coarse fly ash as a replacement of condensed silica fume in producing high-strength concrete

Abstract

This paper presents a method of improving coarse fly ash in order to replace condensed silica fume in making high-strength concrete. The coarse fly ash, having the average median diameter about 90–100 μm, yields a very low pozzolanic reaction and should not be used in concrete. In order to improve its quality, the coarse fly ash was ground until the average particle size was reduced to 3.8 μm. Then, it was used to replace Portland cement type I by weights of 0%, 15%, 25%, 35%, and 50% to produce high-strength concrete. It was found that concrete containing the ground coarse fly ash (FAG) replacement between 15% and 50% can produce high-strength concrete and 25% cement replacement gave the highest compressive strength. In addition, the concrete containing FAG of 15–35% as cement replacement exhibited equal or higher compressive strengths after 60 days than those of condensed silica fume concretes. The results, therefore, suggest that the FAG with high fineness is suitable to use to replace condensed silica fume in producing high-strength concrete.