Abstract
A geophysical investigation was performed to evaluate the effectiveness of three geophysical methods (electrical resistivity imaging (ERI), seismic refraction (SR), and multiple-channel analysis of surface waves (MASW)) for geotechnical site characterization in swamps and environmentally sensitive wetland areas. The geophysical test results were verified against the results from borehole and cone penetrometer test logs. The ERI results were best for determining the depth to the glacial till. However, the resolution of the ERI survey was not sufficient to accurately predict the upper lithologies. The electrode spacing (4 m) was instead selected to reliably predict the depth to the till, which in this case varied between 4.6 and 10.7 m. The SR results overestimated the depth to the till because of the presence of a stiffness reversal. The MASW results predicted the depth to the refusal till layer less accurately than the ERI method. However, this method was able to detect the three distinct layers above the till, even though the layer thicknesses were consistently underestimated. The complementary use of geophysical techniques was a successful approach in determining the main soil units and the depth to the competent layer (till) at the site. These methods can be used as a basis for further development to optimize a procedure to reduce the number of boreholes required for conventional site investigations in areas that are environmentally sensitive or where access is restricted.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have