Use of Fly Ash and Cu-Slag from Mexico to Make Alkali Cements and Hybrid Cements

Abstract

ABSTRACTThis paper focus on evaluating the ability to use Mexican fly ash (FA) and copper slag (CS) to produce alkali cements (0% OPC) or hybrid cements (20% OPC + 80% fly ash). The alkali activators used were two: 8 M NaOH solution for alkali cements and NaCl with sodium silicate for hybrid cement (HYC). Results of mechanical testing and characterization of the reaction products formed after 2 and 28 days are presented and discussed. Mechanical strength in some cases exceeded 20 MPa, at 2 days curing. The chemical characterization techniques used were X-Ray Diffraction (XRD) and scanning electron microscopy (SEM).