Use of electropolishing for enhanced metallic specimen preparation for electron backscatter diffraction analysis

Abstract

The effects of mechanical polishing with Al 2O 3 and colloidal SiO 2 followed by electropolishing were studied for preparation of metal alloy specimens for Electron Backscatter Diffraction (EBSD). The alloys studied were Inconel 718, a commonly used nickel-based superalloy, and a Ti–Al–Nb alloy (nominally Ti-22Al-28Nb(at.%)). Atomic Force Microscopy was used to measure the surface topography to attempt to correlate nano-scale surface roughness with EBSD pattern quality. The results suggest that mechanically polishing with Al 2O 3 followed by electropolishing for a short time can produce EBSD pattern confidence indices and image quality values that are equal to or better than those produced by mechanically polishing with colloidal SiO 2 alone. The data suggests that surface roughness on the scale considered here has much less effect on EBSD pattern quality than had been previously believed. The data suggests that removing the surface damage is more critical than reduction of topography for EBSD.