Use of Cement Kiln Dust and Silica Fume as partial replacement for cement in concrete

Abstract

Cement is amongst the most polluting materials utilized in the building sector, contributing to a variety of hazardous pollutants, including greenhouse gas emissions. This raises health impacts related to the manufacture of cement. As a result, a substitute substance for conventional cement with low environmental effects and better building characteristics is required. The purpose of the study would be to look at the consequences of using supplementary cementitious materials (SCMS) to substitute cement in a concrete mix partially. This study employed silica fume (SF) and cement kiln dust (CKD) as supplementary cementitious materials. Several concrete mixtures were created by substituting cement by a combination of SF and CKD in three proportions which that 25%, 35%, and 45% within curing periods of (one week and four weeks); the concrete mixtures were tested. The ultrasonic pulse velocity (UPV) test has been used to investigate the concrete mixture’s strength in this study. The findings show that the optimal proportion of SF replacement cement and CKD involvement ranged from 25% to 35%. The pulse velocity of specimens improves when the proportion of CKD and SF increases to the optimal percentage, while the larger amounts of these by-products begin to lower the pulse velocity of specimens.