7-days of FREE Audio papers, translation & more with Prime
7-days of FREE Prime access
7-days of FREE Audio papers, translation & more with Prime
7-days of FREE Prime access
https://doi.org/10.1007/s11164-009-0028-6
Copy DOIJournal: Research on Chemical Intermediates | Publication Date: Mar 1, 2009 |
In this study, an anodized tubular TiO2 electrode (ATTE) on titanium foil was prepared and used both as a photoanode and a cathode in an enzymatic photoelectrochemical system to split water into oxygen and hydrogen. The effect of applied voltage when anodized, thickness of the foil, electrolytes, annealing temperature, and cathodes was investigated (optimum conditions: 20 V of applied voltage in 0.5 vol.% of hydrofluoric acid, 0.25-mm foil thickness, and 450–650°C annealing temperature). The samples with higher activities had similar X-ray diffraction (XRD) patterns, clearly indicating that the samples showing the highest evolution rate were composed of both anatase and rutile, while those showing a lower evolution rate were made of either anatase or rutile. The ATTE successfully replaced the Pt mesh cathode and the immobilization of the enzyme enhanced the H2 evolution by 50% (from ca. 66 to 99 μmol/(h × cm2)). Moreover, the use of KOH instead of Tris–HCl buffer in a cathodic compartment further increased the H2 evolution to 115 μmol/(h × cm2).
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.