Abstract
A novel vapor-generation technique is described for mercury determination in aqueous solutions. Without need for a chemical reducing agent, dissolved mercury species are converted to volatile Hg vapor in a solution cathode glow discharge. The generated Hg vapor is then transported to an inductively coupled plasma for determination by atomic emission spectrometry. Mercury vapor is readily generated from a background electrolyte containing 0.1 M HNO 3. Vapor generation efficiency was found to be higher by a factor of 2-3 in the presence of low molecular weight organic acids (formic or acetic acids) or alcohols (ethanol). Optimal conditions for discharge-induced vapor generation and reduced interference from concomitant inorganic ions were also identified. However, the presence of chloride ion reduces the efficiency of Hg-vapor generation. In the continuous sample introduction mode, the detection limit was found to be 0.7 microg L (-1), and repeatability was 1.2% RSD ( n = 11) for a 20 microg L (-1) standard. In comparison with other vapor generation methods, it offers several advantages: First, it is applicable to both inorganic and organic Hg determination; organic mercury (thiomersal) can be directly transformed into volatile Hg species without the need for prior oxidation. Second, the vapor-generation efficiency is high; the efficiency (with formic acid as a promoter) is superior to that of conventional SnCl 2-HCl reduction. Third, the vapor generation is extremely rapid and therefore is easy to couple with flow injection. The method is sensitive and simple in operation, requires no auxiliary reagents, and serves as a useful alternative to conventional vapor generation for ultratrace Hg determination.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have