Usage of the Cast Iron Cylindrical Liner in an Automobile Engine Block

Abstract

This study addresses the issues related to the quality of the connection between cast iron liners and inserts in a pressure die-cast automotive engine block, along with the macro and micro wear of the cylinder bearing surface. it was found that the commonly used HPDC high-pressure casting technology of Al-Si alloy engine blocks with cast iron liners, in which the cylinder liner is then recreated, does not ensure their metallic connection. The micro-gap created there becomes thicker as the engine is used, which worsens the conditions for heat dissipation from the sleeve to the block. Locally, on the surface of the cylinder bearing surface, reductions in honing effects and longitudinal cracks were observed. The presented literature mechanism of micro wear of the cylinder bearing surface, dependent on the morphology of graphite segregations, was confirmed. The mechanism of creating micro-breaks in the area of phosphoric eutectic and graphite precipitation occurrence was presented, initiated by the formation of microcracks in the eutectic and delaminations at the eutectic-matrix boundary.