Abstract
Sandwich beams were prepared by vacuum-assisted resin transfer molding, containing a PVC foam core covered with two glass fiber/epoxy composite face sheets. Their mechanical properties were measured by impact test and three-point bending (3 PB) test. To improve the interfacial bonding between the PVC foam core and glass fiber face sheets as well as the mechanical properties of the sandwich structure, different chopped fibers (aramid fiber, carbon fiber and glass fiber) with the same lengths and densities were inserted at the face-core interface during fabrication. Compared with the beam without interfacial reinforcement, the bending strength and energy absorption were increased by up to 100% and close to 161% respectively under 3 PB condition, and the impact strength after interfacial reinforcement using chopped glass fiber was augmented by nearly 45%, surpassing those of other two kinds of chopped fibers. The interfacial distribution characteristics of different chopped fibers were tested using scanning electron microscopy. The toughening and strengthening mechanisms for mechanical properties were analyzed based on the interfacial crack-bridging and wettability between chopped fiber and resin.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.