Urea decomposition and HNCO hydrolysis studied over titanium dioxide, Fe-Beta and γ-Alumina

Abstract

The catalytic effect of titanium dioxide, Fe-Beta, γ-Alumina, on the thermal decomposition of urea and hydrolysis of HNCO, was investigated using differential scanning calorimetry (DSC) and mass spectrometry (MS). The catalytic materials were coated on cordierite substrates and a pure cordierite sample was also used for comparison. The urea was administered by impregnating the monoliths with an urea/water solution. The experiments were performed using a constant heating rate of 10K/min and over a temperature range of 25–500°C. A sweep gas flow rate of 80mL/min of either dry or humid Ar was used. The results show that TiO2 is the best hydrolysis catalyst. Fe-Beta showed a very large ammonia production, due to selective adsorption of urea during the impregnation of the monolith in the urea solution. One experiment with lower flow, higher urea loading and increased ramp speed conducted in dry Ar over TiO2 showed a large formation of biproducts. This experiment was repeated in the presence of water and this decreased the formation of CYA and biuret significantly. The reason for this is the effective hydrolysis of the HNCO over titania, which hindered the bi-product formation.