URBAN STORMWATER QUANTITY/QUALITY MODELING USING THE SCS METHOD AND EMPIRICAL EQUATIONS1

Abstract

ABSTRACT: Runoff depth and pollutant loading (Biological Oxygen Demand [BOD5], Total Suspended Solids [TSS], Total Kjeldahl Nitrogen [TKN] and lead [Pb]) computations of urban stormwater runoff from four small sites (i.e., 14.7–58.3 ac) in South Florida were performed using the Soil Conservation Service (SCS) hydrology method and empirical equations developed by the U.S. Environmental Protection Agency (EPA). Each site had different predominant land uses (i.e., low density residential, high density residential, highway and commercial). Quantity and quality data from 95 storm events at these sites were measured by the U.S. Geological Survey (USGS), and used for calibration of the methodology to derive appropriate input parameters. Calibrated input parameters were developed for each land use to test the applicability of the methodology in small sub‐tropical urban watersheds, and to provide hydrologists with a way to select appropriate parameter values for planning studies. A total of 16 independent rainfall events were used for verification of the methodology. Comparisons of predicted versus measured data for both hydrographs and pollutant loadings were performed.