Uranium concentration using reactive polymer thin films for spectroscopic analyses

Abstract

This contribution describes the development of reactive polymer films for the concentration of uranium from circumneutral pH solutions for spectroscopic analyses. These films were prepared by grafting uranium-selective polymers from polyethersulfone (PES) films via UV-initiated polymerization, and by introducing uranium-selective functional groups to polyacrylonitrile (PAN) films by chemical reaction. Ellipsometry was used to study poly(phosphoric acid 2-hydroxyethyl methacrylate ester) film growth kinetics on PES films. X-ray photoelectron spectroscopy of modified PAN films revealed conversion of nitrile groups to amidoxime groups to be as high as 40% and showed that the extent and depth of reaction could be varied precisely. Static uptake experiments with solutions of depleted uranium spiked with 233U were conducted to determine uranium binding capacities and kinetics of the modified polymer films at different pH values from 4 to 8. Sorption isotherm data were fitted to the Langmuir model, and the highest sorption capacities of 1.09 × 10−2 ± 1.03 × 10−3 mmol m−2 and 1.02 × 10−2 ± 3.00 × 10−3 mmol m−2 were obtained at pH 6 for modified PAN (M-PAN) and PES (M-PES) films. Capacities at pH 4 and 8 were lower and could be explained by differences in sorption mechanisms. Uranium batch uptake kinetics followed a pseudo-second order rate model. Equilibrium uptake was attained within 3 h for M-PAN film and 1 h for M-PES film. Alpha spectroscopy pulse height spectra were analyzed to study the role of selective layer film thickness on peak energy resolution. Full width at half maximum values from 29 to 41 keV were recorded for M-PAN film and from 26 to 45 keV for M-PES film. Whereas uranium uptake increased with selective layer film thickness and varied with polymer chemistry/extent of modification, the peak energy resolution was independent of layer thickness and polymer chemistry within the experimental measurement uncertainties. Results from this work are being used to guide the development of thin-film composite membrane-based detection methods for the rapid, fieldable analysis of radionuclides in water for nuclear forensics investigations and environmental studies.