Abstract
Activated carbon prepared from silk cotton hull (SCH) was used for the adsorptive removal of Pb(II) ion from aqueous solution. The raw material used for the preparation of activated carbon is the waste of agricultural product; the production of this carbon is expected to be economically feasible. Parameters such as agitation time, metal ion concentration, adsorbent dose, pH and Particle size were studied. Adsorption equilibrium was reached within 80 min for 10, 20, 30 and 40mg/l of Pb(II) ion with 50mg of carbon per mL of solution. Adsorption parameters were determined using both Langmuir and Freundlich isotherm models. The adsorption efficiency reached 100% for 20, 30 and 40mg/l of Pb(II) ion with 120, 140 and 150mg of carbon. Pb(II) ion removal increased as the pH increased from 2 to 5 and remains constant up to pH 10. Desorption studies were also carried out with dilute hydrochloric acid to know the mechanism of adsorption. Quantitative desorption of Pb(II) ion from carbon indicates that adsorption of metal ion is by ion‐exchange. Efficiency of the adsorption of SCH was also studied with Pb containing industrial wastewater by varying pH and carbon concentration.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
