Upgrading the Activated‐Sludge Process for Total Nitrogen Removal in Hong Kong

Abstract

ABSTRACTIn order to protect the sensitive waters in Tolo harbour (Hong Kong), Sha Tin and Tai Po sewage‐treatment works were first designed to remove 70% of the nitrogen load from the sewage. Since then, due to continuing serious eutrophication problems in the harbour, both plants have been modified to increase the removal efficiency to 90%.The modifications were based on the Bardenpho process. However, the designers of the two plants adopted different approaches to process intensity, complexity and control of bacterial foam. At Sha Tin, the average monthly results have shown an increase of total nitrogen removal from 60–70% to about 80% since its completion. The addition of methanol was found to be ineffective on further enhancement of the denitrification rate due to difficulties in the apportioning of the second anoxic zone. The overall monthly results for Tai Po have also shown an increase in the removal rate to about 80%, even though 90% was achieved for a short period of time. The major problem encountered at the latter plant was that the process design did not provide an effective control on bacterial foaming, which had affected the smooth operation of the process.