Abstract

Upflow anaerobic sludge blanket (UASB) reactors are widely used to treat domestic sewage and frequently require post-treatment. Little is known about the use of high rate algal ponds (HRAP) for post-treating UASB reactors’ effluent. This study aimed to evaluate a UASB reactor followed by a HRAP in terms of sewage treatment efficiency and biogas production, during one year at demonstration–scale. The UASB reactor co-treated raw sewage and the harvested microalgal biomass from the HRAP, which was recirculated to the reactor. An identical UASB reactor, treating only raw sewage, was used as control. The results showed an overall removal of 65% COD and 61% N-NH4 in the system. Furthermore, methane yield was increased by 25% after anaerobic co-digestion with microalgae, from 156 to 211 NL CH4 kg−1 VS. An energy assessment was performed and showed a positive energy balance, with a net ratio of 2.11 to the annual average.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.