Upcycling strategies for old corrugated containerboard to attain high-performance tissue paper: A viable answer to the packaging waste generation dilemma

Abstract

This study evaluated the suitability of old corrugated containerboard (OCC) to be upcycled into a high-quality pulp for tissue paper manufacture. The evolution of the physicochemical properties of OCC fibers and their effect on tissue properties were tracked across each stage of two elemental chlorine free (ECF) bleaching sequences. The properties of bleached OCC were compared to those of deinked pulp (DIP), southern bleached softwood kraft (SBSK), and refined OCC unbleached. Both sequences reduced the kappa number from 89 to negligible values and increased brightness from 18.9% to ca. 75% ISO, on average 6.2% ISO units below that of DIP. Overall, bleaching significantly increased tensile index and absorbency rate while having adverse effects on bulk and softness and minor impacts on absorption capacity. The change in properties was correlated to the improved fiber bondability and fiber wettability derived from the lignin removal. Compared to DIP, bleached OCC exhibited a higher tensile index, higher freeness, and similar absorption capacity but lower softness. It also showed higher absorption capacity and similar softness than SBSK but lower freeness at a comparable tensile index. The results indicate that upgraded OCC could be used as an alternative fiber to address the forecasted shortage of high-grade recycled papers in recycled tissue grades or replace virgin fibers in producing virgin tissue grades. In addition, it was determined that refined OCC unbleached could also be suitable for use in tissue grades where high brightness is not an essential product feature.