Abstract
Locally produced metallurgical grade silicon (MG-Si ~ 97%) was upgraded by using wet-milling process. This is including milling of MG-Si in presence of 2M HCl solution for different time periods up to 60 min. The effect of milling time in HCl solution was studied. Soaking of the milled products (at optimum milling time 15 min) with continuous stirring in the same solution of 2M HCl for interval time up to 240 min also were investigated. Finally, the effect of addition of 2M HF to the milled product was discussed. The leached samples were investigated by X-ray fluorescence (XRF), and scanning electron microscope (SEM). It was found that, 99.92% purity of MG-Si was achieved after 15 min milling time with 2M HCl followed by addition 2M HF for 240 min with continuous stirring. About 97 % removal efficiency of the impurities was obtained.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
