Unveiling the unique potential of MXene with and without graphene nanoplatelet for thermal energy storage applications.

Abstract

Solar thermal energy storage (TES) is an outstanding innovation that can help solar technology remain relevant during nighttime and cloudy days. TES using phase change material (PCM) is an avant-garde solution for a clean and renewable energy transition. The present study unveils the unique potential of MXene as a performance enhancer in lauric acid (LA), which functions as a base PCM. The addition of graphene nanoplatelet (GNP) into the LA-MXene composite is prepared to comprehend and evaluate the benefits and detriments of adding carbon-based nanomaterial into the PCM via a two-step homogenizing method. A similar weight percentage of MXene and GNP at 0.75 was used for composite synthesis. The study found that the enthalpy of LA-MXene is comparable to LA at 169.87 J/kg and greater than LA-MXene/GNP, which has 137.53 J/kg. Regarding thermal storage performance, LA-MXene exhibited outstanding performance compared to LA-MXene/GNP in terms of enthalpy efficiency (λ) and relative enthalpy efficiency (η), achieving 95.4% and 96.1%, respectively. This is supported by the XPS spectra, which show that the crosslinking structure acted as a barrier, reinforcing the material and preventing further thermal degradation. This has resulted in robust and denser shells that significantly improved light absorption, enhancing both the photothermal conversion and thermal energy storage efficiency of LA/MXene. The present study reveals that LA-MXene is a promising and optimal candidate for the feasibility and reliability of TES in solar renewable energy applications. It was observed that the incorporation of exclusive MXene may effectively address the limitations of LA as a conventional PCM and surpass the traditional role of GNP. This study offers valuable insights into the superior performance of MXene alone, eliminating the need for doping with various nanomaterials and thereby reducing the complexity in synthesizing the PCM.